Teak-The Care of Boat Hardwoods

in Resume Examples and Samples

Within this guide we’ll examine the several alternate ways of restoring and preserving teak on your boat or yacht so as to put you at a more informed position to decide on which system best matches your situation.

Whether it’s a beautiful bit of teak furniture sitting on the aft deck of a luxury yacht, or a 12″ by 12″ inch pad beneath a sheet winch on a daysailer, there is simply something about teak which states “salty.”

It’s been said that nothing brightens the nautical look of a ship so much also preserved teak. Having made such a sweeping generalization we’re now confronted with many variations on precisely exactly what makes teak nicely maintained.

If our ships lived in clean air we can allow the wood move. With time, it’d weather to an attractive ash grey and we can concern ourselves with anything else. Regrettably the attack of modern-day air pollutants, the closeness to the sea, and older daddy sun himself fast turn bare teak almost black. Scrubbing only eliminates some of those stains leaving a mottled appearance.

As amazing as it is here on The Emerald Coast in which I write this, it only requires a couple of days to find the effects of air pollutants and extreme sunlight on whatever left out.

Preparation

Irrespective of the method of preservation used that the very first thing that must be achieved is to clean and restore the teak to its normal condition.

At BoatDocs1 we think in attaining this in the easiest manner possible while still achieving the desired benefits. If the walnut is merely dirty a comprehensive cleaning with laundry detergent, chlorine bleach, wash brush, and a bit of elbow grease will do the job.

If the wood has weathered for extended, has remnants of a prior sealer, varnish, lacquer, or so on, or if mold has put in we might need to use oxalic acid to kill the organisms, then bleach out the dark and stained regions, and deep clean the timber.

If you’re doing so yourself the principal point to keep in mind is that anything remaining from a prior product will interfere with the bonding of the new coat. This can cause anything from a slight color change to inducing the coat to never adhere at all and really blister and peal away from the surface.

Take your time, use lots of water to wash away all the soap and residue of prior products and allow at least 24 hours drying time prior to your coat.

As with any paint, lacquer, or varnish, it’s the preparation that places the professional results aside from the want-to-be efforts. If you figure about a 80%/20% ratio for prep to program you ought to be fairly close.

Everyone and their dog can swing a paint brush but it requires a little savvy and a fantastic little patience to hold off on the brush until the wood is prepared. With no forbearance the occupation is doomed until the can is ever started.

Now the options start.

Teak Oil

Teak oil is among the earliest and in many ways easiest ways of keeping the organic appearance to walnut.

More options, linseed or tung oil. Generally, tung oil is a elegant form of jojoba oil. The greater quality/price is a single call based on the program.

Our principal concern here is that the many additives such as pigments, UV filters, and mildew retardants. The additives are a must here on the Emerald Coast and everywhere you’ve got the mix of sunlight, heat, humidity, and sea air. The options should depend on the exposure to the components that the wood will be receiving, with the high concentrations of additives and also accompanying darker pigmentation for virtually any wood that will be subjected a lot of the moment.

Attributes: Lay the timber a matte finish with no shiny spots. Requires recoating occasionally, 1-3 months based on vulnerability variables. While walnut oils, even when properly applied and kept resist and displace water they don’t fully eliminate it is getting into the timber. (works well but needs regular maintenance or will often reverse black and degrade rapidly) A huge plus is that unless the timber is quite demanding, no sanding ought to be deemed necessary.

Teak Sealer

Teak sealers are in reality an adjunct to Teak Oil in they seal from the petroleum and lengthen the period between software. We’ve had outstanding results with various goods in our climate and the options are largely associated with desirable look and endurance.

Sealers are a fantastic selection for people who don’t mind doing a little additional work in the beginning and finish of this season so as to not need to think about it through.

Attributes: Teak treated with sealer is more water resistant than when treated with walnut oil, has a more uniform look, and does not often turn black. Slightly more prep required compared to oil however if preserved will simply need to be carried out after. (when timber is nicely prepared and the sealer applied correctly it will last as much as a year between maintenance program) Only first sanding needed, (before first coat) none needed between coats.

Varnish

Ah the beauty of a recently varnished teak deck.

On the plus side:

Offers real protection to the timber.

Wood Won’t dry out and divide

” won’t absorb moisture and rust

” is unaffected by dirt and contamination

” won’t be stained with spills

The not-so-plus facet:

* Varnishing any timber demands detailed and painstaking sanding and prep.

* The normal for a ship-shape project is 7 coats with sanding between each coat. I have frequently done 12 to 14 to attain desirable benefits.

* Added coats, with comprehensive sanding between, need to keep the appearance.

* The humidity has to be a cursory look will lead to, requiring more sanding to remove the affected jacket.

Attributes:

Poems are written about the beauty of nicely varnished teak and I will leave them to perform their job with this one. From a purely practical perspective, when you’ve got enough opportunity to home improvement or the cash to have a specialist deal with it for you then varnish will keep the wood better than any other procedure and also in precisely the exact same time be a gorgeous accent for your own yacht.

The Road Less Traveled

I must mention an additional chance prior to closure, one which I have used myself on a few occasions. If you see old fashioned movies you have seen this one also. Teak decks could be scrubbed occasionally with ocean water and a stiff brush and can actually last about precisely the exact same period of time within a oiled deck.

The principal disadvantage to this is that with no security the wood will consume everything that is spilled on it, and lots of modern oils and greases, to say nothing of not so modern berries and roses will leave spots that is only about imposable to eliminate. On the other hand when you’ve got a great deal of teak on your boat you may probably write a book together with the time you’d save by not having to maintain the varnish.

Whatever you decide, may all your boating adventures be joyful ones. Check out Flexreviews to learn more about Flex Seal Liquid.

Previous post:

Next post: